Personalize the Lighting Signature of Your Audi Q5 or SQ5
Give your Audi Q5 or SQ5 a distinctive and customizable daytime running light appearance with RGB+W LED DRL boards developed for compatible original Audi headlights. Select from a broad color spectrum, activate a dedicated white tone and control the lighting directly through the compatible smartphone app.
Full RGB+W Lighting Customization
The RGB+W configuration combines adjustable multicolor LEDs with a dedicated white LED channel, allowing you to personalize the daytime running light appearance of your Audi through a compatible smartphone app.
RGB+W
Choose from a broad color spectrum, including cool blue, vibrant green and bold red tones, or activate the dedicated white LED channel through the compatible control app.
Smartphone Control via Bluetooth
The included Bluetooth controller provides wireless communication between the RGB+W DRL boards and the compatible smartphone app. The app can be accessed by scanning the QR code provided on the controller.
In addition to replacing the original DRL boards, the included Bluetooth controller must be mounted and electrically connected separately for app-controlled RGB+W operation.
Compatible Audi Models
This product is intended for compatible Audi Q5 and Audi SQ5 models within the listed 2013–2017 product range. Compatibility depends on the original headlight configuration installed in the vehicle.
Audi Q5 2013–2017
Intended for compatible Audi Q5 models equipped with the original headlight design shown in the corresponding product images.
Audi SQ5 2013–2017
Intended for compatible Audi SQ5 models equipped with the corresponding original headlight design shown in the product images.
Audi Q5 and SQ5 models can be equipped with different internal headlight configurations. Please ensure that your car headlights are the same as the ones shown in the product image(s) before ordering.
Important Installation Requirements
Installation requires access to components located inside the sealed headlight assembly. The headlight lens must therefore be separated from the housing before the original DRL boards can be replaced.
Headlight Lens Removal
The headlights must be removed from the vehicle and carefully opened to access the internal DRL boards. The lens must be separated from the headlight housing before installation can proceed.
Professional Installation
Professional installation is strongly recommended because the headlights must be opened, correctly reassembled and properly resealed after the replacement boards have been installed.
After installation, the headlight lens and housing must be correctly resealed to help protect the internal components from moisture and contamination. The RGB+W controller and its electrical connections must also be installed separately.
Why Choose DRLs Direct?
Developed for compatible Audi Q5 and SQ5 headlights Intended for the supported 2013–2017 product range
These replacement boards are developed for compatible original Audi Q5 and SQ5 headlights within the listed 2013–2017 product range.
Designed for compatible original headlights Not intended for unsupported or aftermarket configurations
The boards are intended for compatible original Audi headlights. They are not designed for aftermarket headlight assemblies or original headlight versions that use a different internal DRL configuration.
Vehicle-specific board design Developed for the corresponding mounting positions
The board shapes and mounting positions are developed from original headlight data to correspond with the DRL components inside the supported Audi headlights. These are aftermarket replacement boards and are not original Audi parts.
Wide RGB color spectrum Personalize the appearance of your daytime running lights
Use the compatible smartphone app to select from a broad range of colors and adapt the daytime running light appearance to your preferred style.
Dedicated white LED channel A separate white tone alongside the RGB spectrum
In addition to the adjustable RGB color spectrum, the boards include a dedicated white LED channel for a cleaner white appearance than a tone created solely by mixing RGB colors.
Bluetooth smartphone control Wireless access through the compatible control app
The included Bluetooth controller provides communication between the RGB+W boards and the compatible smartphone app. The app can be accessed through the QR code supplied on the controller.
Complete DRL board set Coordinated lighting across both headlights
Each package includes the required RGB+W DRL boards for the left and right headlights, together with the Bluetooth controller.
Professional headlight opening required Lens separation, reassembly and resealing are necessary
Installation requires separation of the headlight lens from the housing. The headlight must be correctly reassembled and resealed after installation, which is why professional installation is strongly recommended.
Separate controller installation Additional electrical connections are required
The RGB+W system requires more than replacing the internal circuit boards. The Bluetooth controller must also be mounted and connected to the boards and the required electrical supply.
Designed around the original headlight configuration Changes the DRL appearance without intentional alteration of other functions
When the correct boards are selected and installed properly, the upgrade is intended to change the daytime running light color without intentionally altering separate headlight functions. Compatibility can depend on the installed headlight configuration.
Product Specifications
- Product type
- RGB+W replacement LED DRL boards
- Compatible vehicle family
- Audi Q5 and Audi SQ5
- Listed product range
- 2013–2017
- Headlight compatibility
- Compatible original Audi headlights only
- Lighting technology
- RGB LEDs with a dedicated white LED channel
- Color selection
- Adjustable RGB color spectrum and dedicated white tone
- Control method
- Compatible smartphone app via Bluetooth
- App access
- QR code supplied on the Bluetooth controller
- Set contents
- RGB+W DRL boards for the left and right headlights
- Controller
- Bluetooth controller included
- Board installation
- Replacement of the corresponding internal DRL boards
- Headlight opening
- Lens must be separated from the headlight housing
- Headlight reassembly
- Correct reassembly and resealing required
- Controller installation
- Separate mounting and electrical connection required
- Installation recommendation
- Professional installation strongly recommended
Headlight Opening Guide
Installation requires removal of the headlights, separation of the lenses from the housings and replacement of the internal DRL boards. The headlights must then be correctly reassembled and resealed. The included Bluetooth controller additionally requires separate mounting and electrical connection. Professional installation is strongly recommended.
